Manuals & Instructions
Highlight™ Installation & Operation Manual
Highlight™ RHCC & RHZC Quick-Start Guide
Case Unloading Instructions
Case Caulking Instructions
Case Joint Hardware Instructions – RHCC24, RHCC30, & RHZC30
Case Joint with Insulated Divider Hardware Instructions – RHCC24, RHCC30, & RHZC30
Case Cleaning Instructions
CoolView™ Door Maintenance Instructions
NSF Thermometer Instructions
Seismic Bracket Installation Instructions
Shroud Installation Instructions – Highlight™ Models
Spec Sheets
1RHCC30 (1-Door Cooler w/ 30″ Doors)
RHCC24 (Cooler w/ 24″ Doors)
RHCC30 (Cooler w/ 30″ Doors)
RHCC30T (Tall Cooler w/ 30″ Doors)
1RHZC30 (1-Door Freezer w/ 30″ Doors)
RHZC30 (Freezer w/ 30″ Doors)
RHZC30E (Extended Freezer w/ 30″ Doors)
RHZC30T (Tall Freezer w/ 30″ Doors)
RHZC30IM (Ice Merchandiser w/ 30″ Doors)
Additional Resources
Is your case also a Hybrid™?
Get the manual and more information on our Hybrid Documentation page.
Zero Zone Hybrid™ display cases are remote coolers and freezers that are paired with pre-charged condensing units, which are field installed to the top of the display cases. The suction and liquid lines between the case and the condensing unit are connected by quick-connect couplings. These cases are typically equipped with a condensate removal system that includes a condensate pump and an evaporation pan. The case will have shrouds, and the case controller display will be visible through the front shroud.
Is the case model you need not listed above?
Try one of the following current Zero Zone display case models:
- Models RHMC & RHLC – Highlight Merchandiser® Reach-Ins
- Models RVMC & RVLC – Crystal Merchandiser®
- Models ORMC – Reveal Merchandiser® Open Multi-Decks
- Models ORMCD – Reveal Merchandiser® Multi-Decks with Doors
Or browse through discontinued Zero Zone display case models manuals or discontinued Zero Zone display case models spec sheets